PERBANDINGAN EVALUASI KINERJA FEM-SIMULATION MENGGUNAKAN SOLIDWORKS 2014 DENGAN ABAQUS/CAE 6.14 BERDASARKAN HASIL DEFORM-3D
Daftar Isi:
- Lathe machining (turning) is one of the metal cutting operations are most widely used. Understanding the concept of material removal in metal cutting is very important in the process of design and selection of cutting tools to ensure product quality. By using orthogonal cutting (cutting tool position perpendicular to workpiece). The efficiency and effectiveness of the lathe machining processes are always taken into consideration in determining the selection of cutting conditions. As the value of the rake angle, the choice of cutting tool and workpiece. Selected cutting tool is DNMA 432, and to workpiece is FCD 500. DNMA 432 is a carbide tool inserts, while FCD 500 is ductile cast iron. One way in lathe machining efficiency and effectiveness, ie the process simulation finite element method (FEM-Simulation). FEM-Simulation obtained with the definition and validation of the finite element model for large strain and stress values between regions cutting tool contact with workpiece. This study uses SolidWorks 2014 and Abaqus / CAE 6.14, from design to create a cutting tool and the workpiece, and then insert the value of the properties of each material. Then perform FEM-Simulation with certain cutting conditions, the results obtained from literature sources of data validation. The simulation results obtained will be used as a comparison with the results of the simulation literature sources