Experimental Study of Wickless Heat Pipe with Flat Evaporator for Used in Cooling of Electronic Components
Main Authors: | Adnan, Samah Ihsan, Ahmad, Aouf Abdulrahman, Abdulrasool, Adnan Abdulamar |
---|---|
Format: | Article info application/pdf Journal |
Bahasa: | eng |
Terbitan: |
University of Babylon
, 2019
|
Subjects: | |
Online Access: |
https://www.journalofbabylon.com/index.php/JUBES/article/view/2303 https://www.journalofbabylon.com/index.php/JUBES/article/view/2303/1789 |
Daftar Isi:
- في هذا البحث، تم اجراء التحقيقات التجريبية على الانبوب الحراري بدون حشوة ذات المبخر المسطح الذي ابعادة (100x100x30) مم. تم استخدام عنصر كهربائي مسطح كمصدر للحرارة للجزء الإلكتروني بأبعاد (100x100) مم. الهدف من البحث هو دراسة تاثير نسبة الملىء ومعدل تدفق الكتلي للماء التبريد على الاداء الحراري لأنبوب الحراري بدون حشوة. تم اجراء التجارب لتقييم اداء الانبوب الحراري بدون حشوة لمجموعة من مدخلات الطاقة من 10 W الى W100. نسب الملىء المستخدمة في العمل الحالي هي 15%, 25%,50% و85%. تم تغيير معدل التدفق الكتلي للماء التبريد أيضا من 0.0083 كغم\ثانية الى 0.033 كغم\ثانية. أظهرت النتائج ايضا ان اعظم قيمة للمقاومة الكلية كانت مساوية 0.82((W/°C
- In this paper, systematic experimental investigations were carried out for a wickless heat pipe with flat evaporator having dimensions (100x100x30) mm. Flat-square electrical element was used to simulate the heat source of electronic part with dimensions of (100x100) mm. The aim of this paper presents the effect of fill ratio and cooling water mass flow rate on thermal performance of a wickless heat pipe. Experiments were performed to evaluate performance of wickless heat pipe for range of input power from 10 W to 100 W. The fill ratios used in the present work were 15%, 25%50% and 85%. The cooling water mass flow rate was also changed from 0.0083 kg/s to 0.033 kg/s. Experimental results showed that the maximum value of wall evaporator temperature was 115°C at input power of 100 W and a fill ratio of 15%. Results also showed that the maximum value of the total resistance was 0.8°C/W.