SMART AQUAPONIC SYSTEM BASED ON IOT (Internet Of Things)
Daftar Isi:
- Aquaponic is a food production method that combines hydroponics and aquaculture to form a system that, through symbiosis, recycles all water and nutrients and thus eliminates all contaminated expenditure to grow plants and aquatic life. This system is divided into 2 parts, namely the automatic plant maintenance system and the PH level detection system in the watering tank. This system uses Arduino Uno as the main driver. The sensor used is a soil moisture sensor that is used to read the state of the soil, temperature and humidity sensors that are used to read the temperature and humidity of the air, the light sensor used to read the value of light intensity and sensor PH Meter that is used to detect water PH levels in the tank. Based on the test results, this design works well, with the percentage of errors from each sensor, 1.06% Soil Moisture Sensor, 2.68% Temperature Sensor and Air Humidity, 1.9% BH1750 Light Sensor, and PH Sensor Meter 5.02%. Then also on the actuator it works successfully based on the microcontroller command that matches the sensor output value with the comparison value. Keywords: Aquaponic Design, Automatic Control Design, Remote Monitoring Aquaponic adalah metode produksi pangan yang menggabungkan hidroponik dan akuakultur untuk membentuk suatu sistem bahwa, melalui simbiosis, mensirkulasi ulang semua air dan nutrisi dan dengan demikian meniadakan semua pengeluaran yang terkontaminasi untuk menumbuhkan tanaman dan kehidupan akuatik. Sistem ini dibagi menjadi 2 bagian, yaitu sistem otomatis pemeliharaan tanaman dan sistem pendeteksi kadar PH pada tangki air penyiraman. Sistem ini menggunakan Arduino Uno sebagai pengotrol utama. Sensor yang digunakan adalah sensor kelembaban tanah yang digunakan untuk membaca keadaan tanah, sensor suhu dan kelembapan yang digunakan untuk membaca suhu dan kelembapan udara, sensor cahaya yang digunakan untuk membaca nilai intensitas cahaya dan sensor PH Meter yang digunakan untuk mendeteksi kadar PH air pada tangki. Berdasarkan hasil pengujian, rancang bangun ini bekerja dengan baik, dengan persentase kesalahan dari masing-masing sensor adalah, Sensor Kelembapan Tanah 1,06%, Sensor Suhu dan Kelembapan Udara 2,68%, Sensor Cahaya BH1750 1,9%, dan Sensor PH Meter 5,02%. Lalu juga pada aktuator berhasil bekerja berdasarkan perintah mikrokontroler yang mencompare nilai keluaran sensor dengan nilai pembanding. Kata Kunci: Rancang Bangun Aquaponic, Rancang Bangun Kontrol Otomatis, Monitoring Jarak Jauh