PROSES PENCETAKAN PISAU PENGGILING JAGUNG DENGAN MENGGUNAKAN CETAKAN PASIR
| Main Author: | NUSIANANDAR, HELDI |
|---|---|
| Format: | Thesis NonPeerReviewed Book |
| Bahasa: | eng |
| Terbitan: |
, 2009
|
| Subjects: | |
| Online Access: |
http://eprints.umm.ac.id/8952/1/PROSES_PENCETAKAN_PISAU_PENGGILING_JAGUNG_DENGANMENGGUNAKAN_CETAKAN_PASIR.pdf http://eprints.umm.ac.id/8952/ |
Daftar Isi:
- In preses making printing machine knife grinder corn is done with the process of casting sand mold. However, in the production of corn knife grinder machine is still there is lack, because it is not based on the calculation and planning techniques, but is done with the experience and try (trial & eror) so often fail and damage on the production of which is the knife too dimesin hard so hard is because this is an error factor of the composition of raw materials, and a knife easily broken and damaged due to this low tempratur at the time of the merger, and the air cavity defect is in the mold, there are several holes this is because the permeability is less dry and pouring the too slow. Therefore pererencanaan techniques required in the production of corn knife grinder machine is. The end of this task is made to minimize errors and to know at the time of printing and the occurrence of disability in a way the whole series of re-printing process with all the know the printing process used and the shape of the pattern and the mold dimensions. And in the process of selection of raw materials and materials that are used later in the process conducted with the optimal and more resistant to friction and worn The process of printing and the selection of appropriate materials that will be able to minimize the error with the calculation of the exact work that will be better for the whole process of milling corn