PERANCANGAN MESIN PENCETAK WINGKO KAPASITAS 50 KG/JAM
| Main Author: | UBAIDILLAH, AKHMAD |
|---|---|
| Format: | Thesis NonPeerReviewed |
| Terbitan: |
, 2014
|
| Subjects: | |
| Online Access: |
http://eprints.umm.ac.id/16160/ |
Daftar Isi:
- The development of domestic industry go hand in hand with the development of the engine world. For that to design the printing industry wingko in the household that the employer is able to meet the needs of the market as much as 150 kg per day. In this thesis will describe the results of the required dimensions for the design of the printing wingko capacity of 50 kg / hour. wingko raw dough density obtained from the place of industry research wingko is 1250 kg / m ^ 3 Activator used motor with a rotation of 500 rpm with a 800 watt power drive connected to the crankshaft pulley and v - belt. Pulley used 3V/9N/9J type with the motor pulley diameter 67 mm pulley is transmitted to rise with each diameter of 200 mm and 67 mm and transmitted back to the crankshaft pulley with a diameter of 250 mm . So from a speed of 500 rpm to 44 rpm to drive the drive shaft that serves as a mold dough wingko which has a capacity of 50 kg / hour.