PERANCANGAN MESIN PRESS BRIKET ENCENG GONDOK DAN SAMPAH ORGANIK DENGAN SISTEM HIDROLIK
| Main Author: | HANDOKO, PRITADHI |
|---|---|
| Format: | Thesis NonPeerReviewed |
| Terbitan: |
, 2014
|
| Subjects: | |
| Online Access: |
http://eprints.umm.ac.id/16148/ |
Daftar Isi:
- Briquetting technology is one of compaction , in which a material is pressure to form a product that has a higher bulk density, lower water content, and the diversity in size, and material properties. There are two ways to improve compaction with or without a binder. Binder is required to make a material that will dibriketkan be homogeneous during the suppression. This thesis aims to design a press machine that can produce briquettes with a diameter of 40 mm and height 10 mm. In the manufacture of briquettes briquettes there are several stages in order to get maximum results material drying, grinding, mixing adhesives, and pengepressan. The steps in the design of this press machine is determining specifications press, hydraulic components calculation, calculation of fluid flow in the cylinder, determining pipeline, pump selection and computation capacity. This design results obtained from the maximum hydraulic pressure is 0.257 kg/mm2, hydraulic press machine capacity for these briquettes is 8kg/h in order to get 520 briquettes in a single step down once pressed jam. Time was 9.9s and the time step up piston 5,67s. Piston speed increase of 2cm/s and the piston velocity was 3.5cm/s. With the pump working pressure of 0, 2827 kg/mm2 and Power pump: 0.236 HP = 175 watts. Distance of the upper and lower molds are ideal ride by the time the piston movement is 200 mm.