PERANCANGAN SEPARATOR SENTRIFUGAL MINYAK SERAI WANGI KAPASITAS 10 LITER/JAM
| Main Author: | WIDIYANTO, HERI WAHYU |
|---|---|
| Format: | Thesis NonPeerReviewed |
| Terbitan: |
, 2013
|
| Subjects: | |
| Online Access: |
http://eprints.umm.ac.id/16082/ |
Daftar Isi:
- Approximately 40% citronella oil production in Indonesia exports. Meanwhile, Indonesia's market share in the international market is currently only about 5%. According to a survey conducted by the author in the area Sumbermanjing Wetan, farmers using traditional tools, such as during the process of purification. They still tend to use silk in separating oil and water coming out of the condenser. It can look for a solution with appropriate technology. Use of the existing distillation at this time is simple in refining technology, especially in terms of purification using centrifugal separator. For making this separator uses material ASTM A 240 for the disk, S 55 C on the casing, the flow rates of oil and water separator = 2000 cm3/minutes = 33.3 cm3/sec, oil flow rate of 10 liters/hour, slope angle = 25° disk separator, 0.273 m high separator, the separator radius 0.2 m, diameter 0.018 m pipe, round disk separator 885 rpm, 1750 rpm motor.