Lihat Juga

• Cement-Bonded Particleboard
  oleh: Dinwoodie, J.M
  Terbitan: (1992)
• The use of modern devices and human activity today have increased noise problem. The applicaton of acoustic panels in building construction could be as an alternative to overcome this problem. The purpose of this study was to investigate acoustical properties of sound absorption coefficient and sound transmission loss from wood wool or excelsior board. Three fast growing species, sengon (Paraserianthes falcataria), african wood (Maesopsis eminii), and mangium (Acacia mangium) lumbers were processed to obtain wool particles. Two different categories of board density and types of resins were used in this study. Sound absorption coefficient was determined using the impedance tube method, while that for the determination of transmission loss based on the reverberation room method. The results showed that the board density of 0.8 g/cm3 had good sound absorption for low and high frequencies compared with board of 1.0 g/cm3. In the medium frequencies those boards reflected the sound. Wood wool cement bonded board was good in sound absorption for high frequency. In the range low to high frequencies, the boards with isocyanate adhesive were good in transmission loss value compared with cement bonded boards. Meanwhile, the boards with density of 1.0 g/cm3 possessed transmission loss value higher than board of 0.8 g/cm3. Keywords: acoustic panel, wood wool board, fast growing species, sound absorption, transmission loss
  oleh: KARLINASARI, Lina, et al.
  Terbitan: (2012)
• This research objective was to evaluate the physical and mechanical properties of particleboard made from logging residue from plantation forest, namely akasia (Acacia mangium) and ekaliptus (Eucalyptus sp). Type particle was sawdust and bonded with Urea Formaldehyde (UF)-Isocyanate mix resin with ratio 100:15. Control resin (UF) was also prepared for comparison with resin solid content 52.7%. The target thickness of particleboard was 1 cm, pressed at 25 kg/ cm2 for 15 minutes at 140 °C. Level of resin was 7% based on oven dry particle weight. The boards were evaluated based on JIS A 5908-2003. The results showed:1) Utilization of UF-isocyanate mix resin improved the moisture content, thickness swelling, and water absorption of particleboard 2) The best particleboard from physical and mechanical properties point of view was particleboard made of akasia bonded with UF-isocyanate mix resin Keywords : Physical and mechanical properties, logging residue, particleboard
  oleh: NURYAWAN, Arif, et al.
  Terbitan: (2012)
• Stem Form And Wood Anatomical Properties Of Two-Sago Species1
  oleh: Perpustakaan UGM, i-lib
  Terbitan: (1995)
• Cementing
  oleh: Dwight K. Smith
  Terbitan: (1976)