Stabilisasi dengan Pasir Terhadap Perubahan Karakteristik Fisik dan Mekanik Tanah Lumpur Lapindo
Main Author: | Rizka Febriyanti; Mahasiswa |
---|---|
Format: | PeerReviewed eJournal |
Bahasa: | ind |
Terbitan: |
SKRIPSI Jurusan Teknik Sipil - Fakultas Teknik UM
, 2016
|
Online Access: |
http://karya-ilmiah.um.ac.id/index.php/TS/article/view/51720 |
Daftar Isi:
- ABSTRACT Febriyanti, Rizka. 2016. Stabilisasi dengan Pasir Terhadap Perubahan Karakteristik Fisik dan Mekanik Tanah Lumpur Lapindo. Skripsi, Jurusan Teknik Sipil, Fakultas Teknik, Universitas Negeri Malang. Pembimbing: (I) Dr. Ir. I Wayan Jirna, M.T., (II) Drs. Eko Setyawan, S.T., M.T.Kata kunci: tanah lempung, lumpur Lapindo, karakteristik fisik tanah, karakteristik mekanik tanah, stabilisasi pasir, kuat geser.Meluapnya lumpur Lapindo menimbulkan berbagai macam dampak bagi lingkungan sekitar. Berbagai macam cara telah dilakukan untuk menanggulanginya, seperti memanfaatkan lumpur yang ada. Tanah lumpur Lapindo tergolong jenis tanah lempung. Tanah lumpur Lapindo memiliki sifat plastisitas yang tinggi dan potensi pengembangan yang rendah. Hal tersebut menjadikan tanah lumpur Lapindo memiliki kualitas dan daya dukung yang rendah apabila tanah lumpur Lapindo dijadikan konstruksi ataupun tanah dasar. Untuk meningkatkan dan memperbaiki karakteristik fisik dan mekanik tanah, dapat dilakukan metode stabilisasi.Penelitian ini bertujuan (1) mengetahui karakteristik fisik tanah lumpur Lapindo setelah distabilisasi dengan pasir, (2) mengetahui karakteristik mekanik (kuat geser) tanah lumpur Lapindo setelah distabilisasi dengan pasir. Stabilisasi pada penelitian ini menggunakan pasir, yang diharapkan dapat memperbaiki gradasi tanah sehingga mampu meningkatkan kualitas dan daya dukung tanah.Rancangan penelitian ini menggunakan penelitian eksperimental. Data penelitian dideskripsikan dalam bentuk tabel dan grafik. Penambahan bahan stabilisasi berupa pasir sebanyak 0%, 5%, 10%, 15%, dan 20% dengan total sampel benda uji sebanyak 60 buah. Parameter yang diuji dalam penelitian ini antara lain LL, PL, SL, dan kuat geser (kohesi dan sudut geser dalam).Hasil pengujian menunjukkan bahwa penambahan pasir 20% menunjukkan adanya perubahan karakteristik fisik dan karakteristik mekanik berupa nilai kohesi dan sudut geser dalam tanah yang lebih baik dibandingkan persentase 0%, 5%, 10%, dan 15%. Nilai IP tanah yang tidak distabilisasi sebesar 26,39%, setelah distabilisasi dengan pasir 20% nilai IP menjadi sebesar 13,31%. Sedangkan, nilai SL tanah yang tidak distabilisasi sebesar 13,77% menjadi 17,96% setelah distabilisasi dengan pasir 20%. Dari hasil pengujian geser langsung didapatkan nilai kohesi tanah yang tidak distabilisasi sebesar 0,298 kg/cm2, setelah distabilisasi dengan pasir 20% nilai kohesi menjadi sebesar 0,138 kg/cm2. Sedangkan nilai sudut geser dalam tanah yang tidak distabilisasi sebesar 17,65° menjadi 39,43° setelah penambahan pasir persentase 20%.ABSTRACT Febriyanti,Rizka. 2016. Stabilization with sand toward Physical and Mechanical Characteristics Changes of Lapindo Mud. Thesis, Civil Engineering, Faculty of Engineering, State University of Malang. Advisors: (I) Dr. Ir. I Wayan Jirna, M.T., (II) Drs. Eko Setyawan, S.T., M.T.Key words:clay, Lapindo mud, soil physical characteristics, soil mechanics characteristics, sand stabilization, shear strengthFlooding of the Lapindo mud cause various impacts to the surrounding environment. Various ways have been done to mitigate them, such as utilizing existing sludge. Lapindo mud classified as types of clay. Lapindo mud possess high plasticity and low development potential. This makes the Lapindo mud soil quality and low bearing capacity of the ground when the Lapindo mud used as construction or subgrade. To enhance and improve the physical and mechanical characteristics of the soil, to do the stabilization method.This study aims to (1) determine the physical characteristics of the soil after the Lapindo mud stabilized with sand, (2) determine the mechanical characteristics (shear strength) after the Lapindo mud soil stabilized with sand. Stabilisation in this study using sand, which is expected to improve the gradation of land so as to improve the quality and carrying capacity of the land.The design of this study using an experimental study. The research data described in the form of tables and graphs. The addition of a stabilizing agent such as sand as much as 0%, 5%, 10%, 15%, and 20% with a total sample of 60 pieces of the test specimen. The parameters examined in this study include LL, PL, SL, and shear strength (cohesion and shear angle). The test results showed the smallest IP value obtained on the addition of sand with a percentage of 20%. From the results obtained IP value on the native land in the amount of 26,39% down to 13,31%. Meanwhile, the value of SL land with the addition of sand percentage of 20%, changed from 13,77% to 17,96%. The addition of sand percentage on the Lapindo mud can decrease the value of IP and increase the value of SL. From the results of direct shear testing the smallest cohesion values obtained in soil stabilized with sand percentage of 20%, from 0,298 kg/cm2decreased to 0,138 kg/cm2. While the shear angle value in the change of 17,65° become 39,43° on the addition of sand percentage of 20%. Decrease in cohesion and increase in the shear angle caused by the addition of sand on the ground.