DAYA ADSORPSI ZEOLIT ALAM CLIPNOTILOLIT-Ca YANG DIAKTIVASI DENGAN PEMANASAN TERHADAP Cu(II), Cd(II) DAN Pb(II)
| Main Author: | Annisa, Rahayu |
|---|---|
| Format: | Thesis NonPeerReviewed Book |
| Bahasa: | eng |
| Terbitan: |
, 2016
|
| Subjects: | |
| Online Access: |
http://scholar.unand.ac.id/4344/1/ABSTRACT.pdf http://scholar.unand.ac.id/4344/2/BAB%20I%20pendahuluan.pdf http://scholar.unand.ac.id/4344/3/BAB%20V%20kesimpulan.pdf http://scholar.unand.ac.id/4344/4/DAFTAR%20PUSTAKA.pdf http://scholar.unand.ac.id/4344/5/Karya%20Ilmiah%20Utuh.pdf http://scholar.unand.ac.id/4344/ |
Daftar Isi:
- The research is about the benefits of natural zeolite as the absorbent activated ion Cu(II), Cd(II) and Pb(II) has been performed. The parameters used are the effect of variations in activation, the size of adsorbent particle, adsorbent mass, contact time, the volume of metal solute, the initial concentration of the solute, and pH of the solute. These parameters were studied to determine the optimum conditions in the adsorption process. The optimum conditions absorption of ion Cu(II), Cd(II) and Pb(II) for the activation process at a temperature of 105oC, a particle size adsorben 125 μm, 0.1 gram of adsorbent mass, contact time of 10 minutes for Cu(II) and Cd(II) while the Pb(II) 30 min, 12.5 mL solution volume metal, the metal solution concentration of 40 mg/L and a pH of 7, the absorption capacity in optimum condition for Cu(II) of 4.74 mg/g, Cd(II) 4.04 mg/g and Pb(II) 4.98 mg/g. Adsorbent characterization by XRD showed that the type of zeolite used is Clipnotilolit-Ca. FTIR characterization of functional groups obtained T-O (where T is Si or Al) on the value of the wave 1400-800 cm-1. SEM characterization of adsorbent before absorption shows that the morphology of zeolite clipnotilolit-Ca has a rough surface morphology and after absorption zeolite Clipnotilolit- Ca surface becomes smoother. Keywords: adsorbent, adsorption, zeolite, heavy metal