OPTIMIZATION OF MACHINING PARAMETERS IN HARD TURNING OF AISI 4340 STEEL
| Main Author: | Priya Singh1 & Dr. Rakesh Rajpal2 |
|---|---|
| Format: | Article |
| Terbitan: |
, 2018
|
| Online Access: |
https://zenodo.org/record/1344376 |
Daftar Isi:
- Producers of machined components and manufactured goods are continually challenged to reduce cost, improve quality and minimize setup times in order to remain competitive. Frequently the answer is found with new technology solutions. Such is the case with grinding where the traditional operations involve expensive machinery and generally have long manufacturing cycles, costly support equipment, and lengthy setup times. However, the grinding process itself may require several machine tools and several setups to finish all component surfaces. Because grinding can be a slow process with low material-removal rates, there has been a determined search for replacement processes. The newer solution is a hard turning process, which is best performed with appropriately configured turning centres or lathes. Hard turning really started to develop at the beginning of the nineties. The reason for this was the availability of new tool materials and the capability of designing a turning machine that was rigid, stable and accurate enough to successfully finish hard turn. The result of these developments have made finish hard turning a viable alternative to grinding, as an accurate finishing operation. The present work concerned an experimental study of turning on AISI 4340 alloy steel by a carbide insert tool. The primary objective of the ensuing study was to use the Response Surface Methodology in order to determine the effect of machining parameters viz. cutting speed, feed, and depth of cut, on the surface roughness of the machined material. The objective was to find the optimum machining parameters so as to minimize the surface roughness. The experiment was conducted in an experiment matrix of 20 runs designed using a full-factorial Central Composite Design (CCD). Surface Roughness was measured using a Talysurf. The data was compiled into MINITAB for analysis. The relationship between the machining parameters were modelled and analysed using the Response Surface Methodology (RSM). Analysis of Variance (ANOVA) was used to investigate the significance of these parameters on the response variables, and to determine a regression equation for the response variables with the machining parameters as the independent variables, with the help of a quadratic model