AUTOMATIC IRRIGATION SYSTEM TO SEE DRY SOIL CONDITION BASED WIRELESS SENSOR NETWORK
| Main Authors: | Susanti, Eka, Febriani, Rosita |
|---|---|
| Format: | Article NonPeerReviewed Book |
| Bahasa: | eng |
| Terbitan: |
Politeknik Negeri Sriwijaya
, 2016
|
| Subjects: | |
| Online Access: |
http://eprints.polsri.ac.id/3588/1/0-cover-depan.pdf http://eprints.polsri.ac.id/3588/2/0-toc.pdf http://eprints.polsri.ac.id/3588/3/E2.pdf http://eprints.polsri.ac.id/3588/ http://first.polsri.ac.id |
Daftar Isi:
- This research explain, if the soil condition is dry, thensensing logic will work and the notification in the form of data will be sent to the owners of agricultural land through a wireless sensor network that is connected to a computer network. Landowners can control irrigation systems and monitor the state of the ground through the sensing logic, which sensing logicwill directly read if the condition of the soil is dry or wet, then the wireless sensor network will transmit signals over a data packet by RSSI indicator, on the other hand it will testing the use of physical layer to support the bandwith frequency. The relay is the motor of the pump, when it is measured by a multimeter the relay is off, the voltage generated at 20.97 Volt because at the off moment, the voltage does not fall / fall to ground so that the output is greater but when the relay is active or pump is on, the voltage become 0.7 Volt, next the resistance value in dry condition is higher, but when hygrometer sensor measure soil in wet conditions the voltage become 1.215V. Further applications for wireless sensor networks in automation management system for irigation will also monitor the condition of water in the soil, when water condition is dry then the valve cover of water flow will open automatically.