APLIKASI SENSOR LM 35 SEBAGAI ALAT PENGGERAK KIPAS DENGAN TAMPILAN LCD BERBASIS MIKROKONTROLER ARDUINO UNO
| Main Author: | Kurniati , Dina Dwi |
|---|---|
| Format: | Thesis NonPeerReviewed Book |
| Bahasa: | eng |
| Terbitan: |
, 2014
|
| Subjects: | |
| Online Access: |
http://eprints.polsri.ac.id/134/1/COVER.docx http://eprints.polsri.ac.id/134/2/BAB%201.docx http://eprints.polsri.ac.id/134/3/BAB%202.docx http://eprints.polsri.ac.id/134/4/BAB%203.doc http://eprints.polsri.ac.id/134/5/BAB%204.doc http://eprints.polsri.ac.id/134/6/BAB%205.doc http://eprints.polsri.ac.id/134/7/DAFTAR%20PUSTAKA.docx http://eprints.polsri.ac.id/134/ |
Daftar Isi:
- ABSTRACT APPLICATION OF THE LM 35 SENSOR AS A FAN DRIVER WITH LCD DISPLAY BASED ON MICROCONTROLLER ARDUINO UNO DINA DWI KURNIATI Along with the development of the technology now, also encourages the development of human mind to create a device that can facilitate their work or create a control device which can control the other devices. One of them is the design of actuator and controller switches on the fan speed by utilizing the LM 35 sensor-based microcontroller Arduino uno. Switches controlling the fan speed based on temperature changes on the sensor LM 35. Increasingly heat sensor detected temperatures LM 35 it will be the maximum (fast) of speed fan. In making the fan control device, there are three indicators that have been on the temperature setting on Arduino program that is <300C to position the fan switch on position 1 (slow), 300C to 390c to position the fan switch in position 2 (moderate), and ≥ 400C to position the fan switch in position 3 (fast). When the sensors detect the LM35 certain temperature it will send a signal to the Arduino microcontroller to activate the relay and turn on the fan switch. Position switches are enabled depending on the magnitude of the temperature on the LM 35. In making the fan actuator with LM 35 sensors have been measured and based on the results of measurements on LM 35 sensors showed that every increase of 10C then obtained voltage to increase by 10 mV or 0.01 V for example at a temperature of 280C when the voltage generated is 0.28 V or 280 mV. The results of measurements on LM 35 sensors that have been obtained in accordance with the parameters of the LM 35 sensors that every 10C increase the voltage output increased by 10 mV. keyword LM 35, ADC, Switch, arduino